ACRYLITE® GMS ACRYLIC SHEET

DESCRIPTION

ACRYLITE GMS Aerospace Acrylic Sheet is manufactured to meet or exceed the requirements of military specification MIL P-5425E.  ACRYLITE GMS sheet is manufactured in equipment that is reserved for aerospace acrylic products, is subjected to a preshrunk cycle, and undergoes an optical inspection which is among the most critical in the industry.

FABRICATION

Any fabrication technique that is appropriate for standard cell cast acrylics will be equally appropriate for ACRYLITE GMS sheet. When drape forming ACRYLITE GMS sheet, excellent results can be achieved if the sheet is heated evenly between 300°F and 320°F.  For pressure forming or vacuum forming operations temperatures of 340°F to 380°F are recommended

APPLICATIONS

ACRYLITE GMS sheet is used in aerospace transparent enclosures in monolithic or laminated form.  Current applications for ACRYLITE GMS sheet include instrument panels, wingtip lenses, dust covers, helicopter bubbles and aircraft canopies.

PROPERTIES

The table below shows typical values for 0.250 inch thick ACRYLITE GMS sheet.  Some values will change with thickness.

TEST                                                      METHOD                              TYPICAL VALUES*

ANGULAR DEVIATION                    ASTM D-637                                        <3 minutes

TENSILE STRENGTH                         ASTM D-638                                        11,000 psi

ELONGATION                                     ASTM D-638                                        5.7%

FLAMMABILITY                                ASTM D-635                                        1.25 inch/min

DEFLECTION TEMPERATURE        ASTM D-648                                        115°C

 (264 psi)

INTERNAL STRAIN                           MIL P-5425E                                         <1%

RESISTANCE TO WEATHERING     MIL P-5425E and

                 (10 days accelerated)          ASTM D-1003                                      Before     After      

LIGHT TRANSMISSION                                                                    92.6%       92.3%

HAZE                                                                                                     0.40%       0.40%

SPECIFIC GRAVITY                            ASTM D-792                                        1.19

THERMAL EXPANSION                   ASTM D-696                                        0.000061 in/in-°C

WATER ABSORPTION (24 hr)         ASTM D-570                                        0.33%

* Not for specification purposes

TWS Plastics, Byron Center, MI  49315  616-634-2782  616-406-0682 Fax  Email

Wooden Jigsaw Puzzle Boards